Med Slab Through Conduit Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized, for a bubble tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and automatic relief of excess body pressure are a standard feature of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of the same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage. Med offers Through Conduit Gate valves in One piece uni-body with the following features: » Size Ranges: 2” through 48” » Pressure Ratings: ANSI #150 to 2500 » Standards compliance: API 6D, API 6A or equivalents » Materials: Cast Carbon Steel, Cast Stainless Steel, Cast Duplex or Other Specials » Ends Connections: Flanged (FF, RF, RTJ) to international standards » OS&Y, Outside Stem and Yoke » Resilient or Metal Seat Options » Optional Locking Device or Stem Extension » Optional Topworks to ISO 5211 » Full Port Med offers Slab Gate Valves including, but not limited to ▲ Resilient Seat Through Conduit Gate Valve ▲ Metal Seat Through Conduit Gate Valve